A high performance, interior/exterior VOC compliant, low odor, two component, water base acrylic-epoxy enamel. Dries to a tough, tile-like finish with excellent gloss and color retention and resistance to: chemicals, moisture, mildew, staining, abrasion, continuous washings, impact and interior/exterior industrial environment.
Recommended uses: For use on properly primed structural steel, masonry blocks, concrete, plaster, wallboard, wood and galvanized metal. Also over previously painted surfaces in sound condition. Not recommended for immersion service.
Fire Retardance: Fire retardant class
With less than 2.5 Volatile Organic Compounds (VOC's) per gallon, EPO-PLEX 5000/5200 series is ideal for application in laboratories, pharmaceutical facilities, food & beverage plants, schools and various institutions in which a clean environment is required.
A on non-combustible surfaces in accordance with ASTM E-84 tunnel test. Independent lab report 84250. Flame spread: 0. fuel contributed: 0 smoke developed: 10.
USDA: Authorized by U.S. Department of Agriculture for use in federally inspected meat and poultry plants on structural non-food contact or incidental food contact surfaces.
FDA: Manufactured from ingredients which conform to FDA 21 CFR-175.300. Applies to EPO-PLEX 5000 brilliant white and selected colors.
Chemical Resistance: Tested in accordance with federal specification TT-C-550C, paragraph 4.4.6, the following solutions show no evidence of discoloration, blistering, loss of adhesion or softening.
5% Sodium Hydroxide
5% Heavy Detergent
5% Sodium Phosphate
5% Sodium Hypochlorite
5% Hydrochloric Acid
5% Sulfuric Acid.
Standard is white, tints are available.
