[112-424]
Series 112 Motorized HEPA Ceiling Filter Module 2'x4' The Series 112 is an FFU (Fan Filter Unit), or it is sometimes called a MCF(motorized ceiling filter). This module is a self-contained filter unit that draws air in through a top-mounted prefilter. It then blows the air out the other side through a HEPA filter (ULPA filter is also available) into a controlled space. A typical application is installing it into a 2 ft. x 4 ft. ceiling grid system, however, units can also be mounted on a support frame or suspended from a support structure. These filters are USP 797 compliant. The galvanized steel blower housing screws to the top of an aluminum framed HEPA or ULPA filter. The internal direct drive blower/motor assembly is isolated from the exterior housing by torsion flex motor mounts and rubber vibration isolation mounts. Internal acoustical foam baffles reduce sound and enhance airflow uniformity. Features: Self-contained design Lightweight All-metal filter housing Easily installs into a 2 ft. x 4 ft. ceiling grid system Standard unit ships with a HEPA filter and prefilter Internal acoustical foam baffles for reduced sound UL listed Operates at low, medium, and high speeds Motorized HEPA Ceiling Cleanroom Filter Specs: 23.625”x 47.625” x 13.25” high, galvanized steel housing with exposed anodized aluminum filter frame, 99.99% @ 0.3 micron HEPA filter with prefilter, 3 positon speed control, U/L listed, 115V, 60 Hz, 2.8 amps For QUANTITY DISCOUNTS, Please Contact Innotech Products!
